stainless steel Professional stainless steel hanger rack welding service for commercial kitchen retail display and industrial storage. Custom sizes with full penetration welds. 304 and 316 grades available.han

What Is a Stainless Steel Hanger Rack?

This component is a storage device made from stainless steel tubing or rod, welded into a frame with hanging hooks or bars. These racks are used in commercial kitchens, retail stores, warehouses, and industrial facilities. Stainless steel contains at least 10.5 percent chromium, which forms a passive oxide layer on the surface.

Our welding technique uses shielding gas—typically argon or a helium argon mix—to protect the molten weld pool from atmospheric oxygen. This allows the chromium to re form its protective layer as the weld cools. A properly welded stainless steel hanger rack will resist rust at the weld line as effectively as the base metal. We also control heat input carefully because too much heat causes chromium carbide precipitation, a condition known as weld decay. By using low heat input and proper technique, we prevent this problem on every project. The result is a durable, corrosion resistant storage solution that performs reliably for decades.

Common Hanger Rack Styles We Weld:

We produce several styles of this component to suit different storage requirements.

Wall Mount Hanger Rack – Space Saving Design:

A flat back plate with projecting hooks, welded to a wall mounted frame. This stainless steel hanger rack style is common in commercial kitchens for hanging utensils, pots, and tools. Saves valuable floor space.

Freestanding Floor Rack – Heavy Duty Storage:

A self supporting frame with multiple tiers of hanging bars or hooks. This stainless steel hanger rack design is used in retail stores for displaying garments and in warehouses for organizing tools.

Ceiling Mount Hanger Rack – Overhead Storage:

Suspended from ceiling joists or beams. This stainless steel hanger rack style maximizes floor space in high ceiling facilities. Used for hanging meat, produce, or inventory.

Mobile Hanger Rack – With Casters:

A freestanding rack mounted on locking casters. This stainless steel hanger rack design allows easy movement between work areas. Common in commercial laundries and food processing facilities.

ご注文ごとに、その部品の仕様や寸法を記録しておりますので、まったく同じ部品を再注文することができます。.

Material Selection for Hanger Rack Welding:

すべてのステンレス鋼が、あらゆる環境下で同等の性能を発揮するわけではありません。当社は、こうした加工プロジェクト向けに3種類の合金を取り揃えています。.

304ステンレス鋼 – The standard choice for indoor commercial applications. Good corrosion resistance and excellent weldability make it our most popular material. Used for stainless steel hanger rack in commercial kitchens, retail stores, and dry storage areas.

316ステンレス鋼 – For wet environments, coastal installations, or areas with chemical exposure. Molybdenum addition significantly improves pitting resistance against chlorides. A 316 version costs more but lasts indefinitely in dishwashing areas or near salt water.

304L 低炭素グレード – For applications requiring maximum weld integrity. Lower carbon content reduces the risk of weld decay. Recommended for stainless steel hanger rack used in food processing or pharmaceutical environments.

We do not recommend 409 stainless for these applications as its corrosion resistance is inadequate for long term use.

Frame and Hook Connection Methods:

We offer three methods of connecting hooks and bars to the main frame.

完全貫通突合せ溶接 – 最高の強度を実現：

Hooks or bars are fully welded to the frame with 100 percent root fusion. This stainless steel hanger rack configuration provides the strongest possible connection. Recommended for heavy loads and high traffic areas.

外側フィレット溶接 – 標準用途向け：

A fillet weld around the base of each hook joins it to the frame. This design is common for standard storage where loads are moderate. Strong enough for most commercial applications.

補強ガセット溶接 – ヘビーデューティー用：

Triangular gussets are added at corner joints for extra strength. This stainless steel hanger rack construction distributes loads over a larger area. Used for industrial racks holding heavy tools or equipment.

ご注文ごとに、接合方法と溶接サイズを記録しています。.

材料の厚さに応じた溶接方法：

We select the optimal process based on your rack material thickness for each order.

2mm～5mmの材料に対するGTAW：

Manual TIG welding gives fine control over the weld puddle and produces the cleanest appearance. For these components, we use amperage between 70 and 130 amps with 1/16 inch 308L or 316L filler rod. Produces smooth welds that require minimal finishing. This is the preferred process for visible stainless steel hanger rack in retail displays.

Pulsed MIG for 3mm to 8mm Heavy Duty Racks:

Pulsed spray transfer reduces spatter and allows higher deposition rates. Our pulsed MIG production runs at 180 to 250 amps with 0.045 inch wire. Most cost effective for stainless steel hanger rack orders over 50 pieces.

大量生産向けロボットMIG溶接：

For customers needing 100 or more identical assemblies, robotic welding ensures every joint matches the last in size and appearance. We program weld paths directly from CAD files.

Distortion Control During Rack Welding:

Racks warp from weld heat because the weld metal shrinks as it cools. A warped rack will not hang level or sit flat on the floor. This is critical for every stainless steel hanger rack produced.

Our solutions include:

• Balanced welding sequence – Weld opposite sides of the rack in alternating order
• Strongback clamping – Clamp components to a thick steel fixture during welding
• Copper backup bars – Sink heat away from the weld zone
• Low heat input technique – Use smallest possible filler wire diameter
• Post weld straightening – Light press correction if needed

Using these methods, we hold flatness to within 1/16 inch over 4 feet for most stainless steel hanger rack applications.

Load Test – Sample from Each Batch:

We mount a sample rack to a test fixture and apply 150 percent of rated load. No permanent deformation or weld cracking permitted.

Visual Inspection – 100 Percent
Each component is examined for weld undercut, porosity, or incomplete fusion. The weld bead must be uniform and fully wetted to both components. No weld defects are permitted.

Dimensional Check – 100 Percent
We measure overall dimensions, hook spacing, and level alignment. Any stainless steel hanger rack with dimensions outside specified tolerances is rejected.

Dye Penetrant Inspection – For Safety Critical
Reveals surface cracks at the weld toe. Required on every component used in food processing or pharmaceutical environments.

Load Test – Sample from Each Batch
We mount a sample rack to a test fixture and apply 150 percent of rated load. No permanent deformation or weld cracking permitted.

We retain test records for 10 years. Upon request, we provide a certified test report.

主な用途および産業分野：

当社の顧客は、この溶接サービスをさまざまな目的で利用しています。.

Commercial Kitchens:

Restaurants, hotels, and institutional kitchens need durable storage for pots, pans, utensils, and aprons. Our stainless steel hanger rack withstands heat, moisture, and frequent cleaning. Sanitary design prevents bacterial growth.

Retail Stores:

Clothing retailers use these racks for garment displays. Our stainless steel hanger rack for retail provides attractive appearance with smooth, snag free surfaces. Electropolished finish available.

Industrial Warehouses:

Tool rooms and maintenance facilities need organized storage. Our heavy duty stainless steel hanger rack holds tools, safety equipment, and supplies. Load tested for safety.

Food Processing Plants:

Sanitary storage is essential in food facilities. Our stainless steel hanger rack for food processing has no crevices to trap debris. All welds are ground smooth and passivated.

Laundries and Dry Cleaners:

Commercial laundries need racks for hanging garments before and after cleaning. Our stainless steel hanger rack withstands steam, heat, and constant loading.

Hospitals and Healthcare:

Surgical gowns, linens, and medical supplies require clean storage. Our stainless steel hanger rack for healthcare meets sanitary requirements. Easy to clean and disinfect.

表面仕上げの選択肢：

The appearance of this component matters for visible retail and kitchen installations. We offer four finish levels.

ミル仕上げ – As welded with light scaling and weld discoloration. Suitable for hidden or industrial applications. Lowest cost option.

ワイヤーブラシ仕上げ – Passivation followed by stainless wire brushing. Removes heat tint and restores uniform satin appearance. Selected by 70 percent of our customers for commercial kitchens.

研磨・磨き仕上げ – Welds are ground flush with surrounding surfaces then polished. The rack becomes smooth to the touch. Recommended for retail displays and food processing.

電解研磨仕上げ – Produces a bright mirror like finish. Resists fingerprints and makes cleaning easy. Recommended for healthcare and pharmaceutical applications.ger rack